Aquadial AQUADIAL COMBI CARE 22MM

How does the aquadial combicare work ?

• It works by proportionally blending a minute amount of 'Aquablend', a safe, food grade product into the incoming water supply.
• The amount blended is accurately controlled by the internal venturi system and is 'proportional' to the service water flow.
• The 'Aquablend' works by suspending the scale forming hardness salts in the water, thus preventing scale build-up.
• This type of treatment is refered to as 'Threshold Treatment'. In many cases the Aquablend will even remove exsisting scale and then deposit a micro-thin, protective layer on the pipework and heating surfaces, thus preventing corrosion problems.
• A 'Change Date' indicator ring for the Aquablend cartridge is included and a reminder service is available every year if required.

Installation of the aquadial combi care.

• The 15mm and 22mm units can be 'spanner' fitted into vertical, horizontal or angled pipe work.
• They can be located in the cold rising main supply or on individual appliances.
• Full fitting instructions are included, for both hard and soft water areas.
• Where there is a possibility of secondary water expansion from the heating boiler back down the system, you are advised to fit a single check/non-return valve after the unit.
• This unit will be affected by hot water transfer back down the system, therefore site the unit as far from the boiler as possible.

Aquadial combicare 22mm

The Aquadial AC002200 combicare 22mm scale reduction system is an ideal solution for the protection of combi boilers, pipework, heaters and hot water systems. This kit includes the head and cartridge for fitting on 15mm pipework. The 22mm aquadial combi care has a maximum flow rate of 54 litres per minute and requires the cartridge replacing every 12 months or 120,000 litres.